Table of Contents
Advertisement
z
c
q
e
w
z
y
GETTING READY TO SEW
Connecting the Machine to the Power Supply
WARNING:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
as the thread take-up lever, loopers, handwheel or
needle.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
x
Do not place anything on the foot control.
Operating Instructions:
The symbol "O" on a switch indicates the "off" position
of the switch.
z Turn off the power switch, and connect the machine
r
t
plug to the machine socket.
x Connect the power supply plug into the wall outlet.
c Turn on the power switch.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet
y Foot control
NOTE:
Make sure to use the power supply cable that came
with the machine.
Wait for a while until the LED light turns on.
For the U.S.A. and Canada only
• Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install
the proper outlet.
Do not modify the plug in any way.
• Foot controller Model YC-482J is for use with this
sewing machine.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the
machine runs.
Step on the foot control with the presser foot lifter up, and
practice controlling the speed.
4
Advertisement
Table of Contents
