Avaya 8800 Planning And Engineering, Network Design page 42

Optical routing design
Figure 6: Wavelength division multiplexing
The Avaya optical routing system supports both ring and point-to-point configurations. The optical
routing system includes the following parts:
• CWDM SFPs
• CWDM SFP+s
• Optical add/drop multiplexers (OADM)
• Optical multiplexer/demultiplexers (OMUX)
• Optical shelf to house the multiplexers
OADMs drop or add a single wavelength from or to an optical fiber.
The following table describes the parts of the optical routing system and the color matching used.
The compatible optical shelf part number is AA1402001-E5.
Table 12: Parts of the optical routing system
Wavelength SFP/SFP+ part numbers
1470 AA1419025-E5, up to 40 km SFP
nanometers
AA1419033-E5, up to 70 km SFP
(nm) Gray
AA1419053-E6, up to 40 km DDI
SFP
AA1419061-E6, up to 70 km DDI
SFP
1490 nm Violet AA1419026-E5, up to 40 km SFP
AA1419034-E5, up to 70 km SFP
AA1419054-E6, up to 40 km DDI
SFP
June 2016
Multiplexer part number
OADM
AA1402002-E5
AA1402003-E5
Planning and Engineering — Network Design
Comments on this document? infodev@avaya.com
OMUX-4 OMUX-8
AA1402010-E5
AA1402009-E5
Table continues...
42