Avaya 8800 Planning And Engineering, Network Design page 202

Multicast network design
Figure 94: MBR configuration
With the Avaya Ethernet Routing Switch 8800/8600 implementation you can place the RP anywhere
in the network.
The following figure shows a redundant MBR configuration, where two MBR switches connect a PIM
to a DVMRP domain. This configuration is not a supported configuration; MBRs that connect two
domains should not span the same VLAN on the links connected to the same domain.
June 2016 Planning and Engineering — Network Design
Comments on this document? infodev@avaya.com
202