User Codes - Bosch AMAX panel 2000 Installation Manual

AMAX panel 2000 / AMAX panel 2000 EN
7.8.3

User Codes

The purpose of User Codes is to arm and disarm the system and perform system functions.
Refer to Section 6 System Functions, page 39. User Codes 1 to 8 can be one to four digits long.
Only User Codes 9 to 16 can be used as remote radio user codes. .
Use User Code 17 to send report when arming/disarming the system by key-switch.Use User
Code 18 to send report when arming the system in AWAY Mode or STAY Mode by keypad
single button.Use User Code 19 to send report when remotely arming the system by
telephone call.
Use User Code 20 to send report when remotely arming the system by A-Link Plus software.
Bosch Sicherheitssysteme GmbH Installation Manual
System Informations 1 | en
F.01U.241.127 | V4 | 2011.12
55