Bosch AMAX panel 2000 Installation Manual page 59

Hide thumbs Also See for AMAX panel 2000:
Table of Contents

Advertisement

AMAX panel 2000 / AMAX panel 2000 EN
1.
2.
3.
5- Follower
The follower zone will perform as below:
1.
2.
3.
6- Interior follower
The interior follower zone will perform as below:
1.
2.
3.
7- 24 Hour Zone
The 24 Hour zone will perform as below:
1.
2.
3.
8- Tamper Zone
The Tamper zone will perform as below:
Bosch Sicherheitssysteme GmbH
Disarm: same as the Instant Zone disarm status
AWAY Arm: same as the Delay Zone AWAY Arm status
STAY Arm:
This Zone will be Ignored and performed as disarm.
Refer to Section Keypad Indicators, page 20 to see how the zone is displayed during exit
time.
When System is disarmed and zone is not restored before, a Zone restore report is sent
Disarm:
same as the Instant Zone disarm status
AWAY Arm:
Zone normal - no Alarm / no report
Zone triggered - Alarm / report
Zone triggered - during exit time - no Alarm / no report
Zone triggered - during entry time - no Alarm / no report
The remaining Delay Time is handed over from the Delay Zone to the Follower Zone.
The follower zone will performance as the same as a delay zone.
If there are two or more zones programmed as delay zones and both are triggered ,
thefollower zone will follow the first triggered delay zone
STAY ARM: same as the delay zone.
When System is disarmed and zone is not restored before, a Zone restore report is sent.
Disarm: same as the Instant Zone disarm status
AWAY Arm: same as the Follower Zone AWAY Arm status
STAY Arm:
This zone will be ignored and performed as disarm.
Refer to Section Keypad Indicators, page 20 to see how the zone is displayed during exit
time.
When System is disarmed and zone is not restored before, a Zone restore report is sent.
Disarm:
Zone normal - no Alarm / no report
Zone triggered - Alarm / report
AWAY Arm:
Zone normal - no Alarm / no report
Zone triggered - Alarm / report
Zone triggered - during exit time - Alarm / report
Zone triggered - during entry time - Alarm / report
STAY Arm: Same as AWAY Arm performance.
A 24 Hour zone does not send a restore report until the zone is restored.
Installation Manual
System Informations 2 | en
F.01U.241.127 | V4 | 2011.12
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amax panel 2000 en

Table of Contents