Table of Contents
Advertisement
TROUBLE SHOOTING
5-6. Service and Maintenance Schedule
Wash Top Cover Underside
Scrub DEV and FIX/WASH racks
Clean the area around processing tanks
Wash DEV, FIX and WASH tanks
Replace developer and fixer
Wash processing tank and racks with system cleaner
Replace FIX side FIX/WASH roller springs
Replace DEV roller and WASH side FIX/WASH roller springs
Wash replenishment tanks and replenishment hoses
Replacing the CPU Backup battery
5-6-1. Checking and Cleaning the
Film Sensor
(1) Remove the top cover.
(2) Install the splash guard.
(3) Remove the Dev. Rack.
(4) Check the film sensor visually and by
manually moving it. When it is stained,
wipe and clean it so that it can properly
function.
(5) Check the operation of the sensor
referring to "Checking the signal input
from the entrance sensor".
48
SERVICE MANUAL
Task
Note
Install the splash guard in order to protect from
splash. Hook the splash guard on
the rib locating at the upper part of the film
entrance slit as shown in the illustration below. If
the chemical solution adheres to the surface of
the film sensor or splash guard, wipe and clean it.
1 mo.
4 mos.
6 mos.
Splash Guard
12 mos. 24 mos.
Hide quick links:
Advertisement
Table of Contents
