11. Disassembly and Reassembly
11-1. Removing the Drier Cover
Note : Make sure the power is turned off before replacing the parts.
Note : Check operation after the replacement is completed.
Tapping screw
DISASSEMBLY AND REASSEMBLY
(1) Turn off the [Power] breaker, and unplug
the power cable.
(2) Remove the top cover.
(3) Remove the drier cover.
1) Remove the tapping screws (M4x12,
2pcs).
2) Disengage the drier cover from the
groove in the rear, and remove.
SERVICE MANUAL
98