Electromagnetic Compatibility; Interference Immunity - Siemens SIMOTICS FD 1LL1 Operating Instructions Manual

The necessary ESD protective measures for electrostatic sensitive devices are illustrated once
again in the following drawings:
(1) Sitting
a = conductive floor surface
d = ESD overall
2.6

Electromagnetic compatibility

This machine is designed in accordance with IEC/EN 60034 and, when used as prescribed, it
satisfies the requirements of European Directive 2004/108/EC - from April 20, 2016 of the
European directive 2014/30/EU on Electromagnetic Compatibility.
2.7

Interference immunity

The machine fulfills the requirements regarding interference immunity in conformity with IEC/
EN 61000‑6‑2.
On machines with integrated sensors (e.g. PTC thermistors), the manufacturer of the overall
system must himself ensure sufficient interference immunity by selecting suitable sensor signal
leads and evaluation units.
SIMOTICS FD 1LL1
Operating Instructions 04/2016
(2) Standing
b = ESD table
e = ESD wristband
Safety information
2.7 Interference immunity
(3) Standing/sitting
c = ESD shoes
f = cabinet ground connection
19