When Text Is Selected In The Fieldtype Menu - SATO TH2 Series Operator's Manual

Section 3: Configuration and Operation
3.6 APPLICATION MENU (Cont'd)

3.6.3 When Text is selected in the FIELDTYPE menu

The following flow summarizes the sequence for defining the field type while editing the field of the format.
FIELDTYPE
menu
Select 1.truetype
*
Select Font
Set horizontal
position
Set the vertical
position
Set the field
size
Select anchor
point
Menu
Page 3-20
Select 1.Text
Set direction
Select the source.
Please refer to the flow
of individual selection.
FONTTYPE menu.
Enables selection of true type font or bitmap font from FONTTYPE menu.
* The details of the screen
may vary depending on
the pre-loaded fonts.
Select 2.bitmap
*
Select Font
Set horizontal
position
Set vertical
position
Set the
horizontal
magnification
value
Select the source.
Please refer to the flow
of individual selection.
Description
TH2 Series Operator Manual
Set the vertical
magnification value
Select anchor
point
Set direction