To Edit The Pre-Loaded Format - SATO TH2 Series Operator's Manual

Section 3: Configuration and Operation
3.6 APPLICATION MENU (Cont'd)

3.6.1 To edit the pre-loaded format

Formats pre-loaded in the printer can be modified, or a new format can be created and stored in the printer.
Unwanted formats can be also deleted from the printer to increase memory space. The following flow
summarizes the sequence for editing the format.
Select 1.Cancel
will not save your
format and return
to the initial
screen.
Select 2.Yes will
save your format
and return to the
initial screen.
Press
Press
Page 3-16
Application
EDIT menu
Select 1.Modify
*
Select Format
to be modified
*
Select "Test Meal"
as an example
*
Set the LENGTH
of the format
*
Set the WIDTH
of the format
Select desired
function, Modify,
New or Delete.
Proceed to the FIELD menu
flow procedure
Select 1.Format
Select 2.New
Key in the new
Format name
*
Press
*
Set the LENGTH
of the format
*
deleting format
Set the WIDTH
of the format
Select 2.New only.
When no formats loaded, selecting
Modify or Delete will displayed
"Not existing!".
TH2 Series Operator Manual
The details of the screen
*
may vary depending on
the loaded formats.
Select 3.Delete
*
Select Format
to be deleted
*
Select "Test Meal"
as an example
Select
1.Cancel
Select 2.Yes
Proceed
Return to
Format search
screen