When Image Is Selected In The Fieldtype Menu - SATO TH2 Series Operator's Manual

3.6 APPLICATION MENU (Cont'd)
Menu

3.6.8 When Image is selected in the FIELDTYPE menu

The following flow summarizes the sequence for defining the field type while editing the field of the format.
FIELDTYPE
menu
TH2 Series Operator Manual
Displays input range and input field with default value.
Enables input of box frame thickness.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables the selection of anchor point of the box field.
TOP_LEFT, TOP_CENTER, TOP_RIGHT can be selected.
Anchor Point is a field co-ordinate representing the field regarding positioning
and rotation.
Select
5.Image
Set horizontal
position
Set the vertical
position
Set the horizontal
magnification value
Set the vertical
magnification value
Section 3: Configuration and Operation
Description
Select anchor
point
Select the source.
Please refer to the flow
of individual selection.
If 1.FIX is
selected
Select loaded
image
Proceed to the FIELD
search screen or new
field NAME input
screen depending on
the previous operation.
Page 3-27