When Barcode Is Selected In The Fieldtype Menu - SATO TH2 Series Operator's Manual

Section 3: Configuration and Operation
3.6 APPLICATION MENU (Cont'd)
Menu

3.6.4 When Barcode is selected in the FIELDTYPE menu

The following flow summarizes the sequence for defining the field type while editing the field of the format.
FIELDTYPE
menu
Select barcode
Set horizontal
position
Set the vertical
position
Page 3-22
Displays input range and input field.
Enables input of text field vertical magnification.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables setting of text field direction in 4 angles; 0, 90, 180 or 270 degree.
Select
2.Barcode
Select anchor
point
Description
Select barcode
direction
Only applicable for:
EAN-8, GS1-128 Composite
CC-A/B, GS1-128 Composite
CC-C, GS1-128, Interleaved 2 of
5, UPC-A, UPC-E, Bookland,
Codabar, Code 128, Code 39,
EAN-13
Set barcode
height
Only applicable for:
Micro QR Code, QR Code
Select correction
level
Only applicable for:
Interleaved 2 of 5, Codabar,
Code 39
Select barcode ratio
Not available for:
Data Matrix, Micro QR Code,
QR Code.
Set the barcode narrow width
Only applicable for:
EAN-8, EAN-13, UPC-A,
UPC-E, Code 39,
Codabar, Bookland,
Interleaved 2 of 5,
GS1-128, Code 128
Set the human
readable barcode info.
Only applicable for:
GS1-128
Set the human readable
below barcode info.
Only applicable for:
Micro QR Code, QR
Code, Data Matrix
Set the code cell size
Only applicable for:
Micro QR Code,
QR Code
Select
encoding
Select the source.
Please refer to the flow
of individual selection.
TH2 Series Operator Manual