Menu Definition Tables - SATO LM408 Operator's Manual

MENU DEFINITION TABLES

MENU
ONLINE
QTY: XXXXXX
OFFLINE
QTY: XXXXXX
PRINT DARKNESS
1 2 3 4 5
PRINT SPEED
2 3 4 5 6
PITCH OFFSET
+00MM
CANCEL PRINT JOB
YES NO
CANCEL PRINT JOB
COMPLETED
LM408-412e Operator Manual
Unit 4: Printer Configuration
NORMAL MODE (TABLE 4-1)
Displays the printer's operational status. The ONLINE status is displayed on the top line and the
label quantity status is on the bottom. The message will be changed to OFFLINE whenever the
printer is switched offline by pressing the LINE key. When a print job is received, the quantity line
will indicate the number of labels to be printed. As the label job prints, the display status indicates
the qunatity of labels remaining to be printed.
Displays the printer's operational status. The OFFLINE status is displayed on the top line and the
label quantity status is on the bottom. The message will be changed to ONLINE whenever the
printer is switched online by pressing the LINE key.
Permits the adjustment of print density. Higher print density equates to darker print images.
Permits the printer's printing speed to be established based on inches per second (IPS).
The label pitch is the distance from the leading edge (the edge that comes out of the printer first)
of a label and the leading edge of the next label. Once the position has been set, it can be fine
adjusted using the PITCH potentiometer.
Positive (+) digit settings moves the leading edge forward and away from the print head while a
negative (-) setting moves the label's leading edge incrementally back into the mechanism.
Print data that has previously been received, can be cleared. If YES is selected, all of the print
data will be deleted and then the printer will go online. If the NO option is selected, the printer will
go online without deleting data.
This screen indicates that the received data has been deleted. Will display for 3 seconds and
then the printer will shift to the ONLINE menu screen.
DESCRIPTION
4-19
PN: 9001155A