Configured Mac Is Not Authenticating; Configure The Switch - Avaya 3500 Series Troubleshooting Manual

Configured MAC is not authenticating

Correct a MAC to allow authentication.
Work flow Configured MAC is not authenticating
The following work flow assists you to determine the cause and solution of a configured MAC
that does not authenticate as expected.
Figure 43: Configured MAC is not authenticating

Configure the switch

Configure the switch to ensure the correct settings are applied to ensure the MAC is
authenticating.
Task flow Configure the switch
The following task flow assists you to ensure the MAC is authenticating on the ERS 3500 Series
device.
Troubleshooting 5.1
Configured MAC is not authenticating
February 2013 101