Non-Eap Mhsa Mac Is Not Authenticating; Configure Switch - Avaya 3500 Series Troubleshooting Manual

Troubleshooting authentication

Non-EAP MHSA MAC is not authenticating

Ensure that the switch is configured correctly.
Work flow Non-EAP MHSA MAC is not authenticating
The following work flow assists you to determine the solution for an MHSA MAC that is not
authenticating.
Figure 48: Non-EAP MHSA MAC is not authenticating

Configure switch

Configure the switch to enable MHSA.
Task flow Configure switch
The following task flow assists you to enable MHSA on the ERS 3500 Series device.
108 Troubleshooting 5.1
Comments? infodev@avaya.com
February 2013