Auto Configuration Is Not Applied; Correct Auto Configuration - Avaya 3500 Series Troubleshooting Manual

Troubleshooting ADAC
1. Follow local procedures and SOPs to reduce the number of devices connected.
2. Use the show adac in <port> command to display the ADAC information for

Auto configuration is not applied

Correct some common issues that may interfere with auto configuration of devices.
Task flow Auto configuration is not applied
The following task flow assists you to solve auto configuration issues.
Figure 29: Auto configuration is not applied

Correct auto configuration

Tagged frames mode may be causing a problem. In tagged frames mode, everything is
configured correctly, but auto configuration is not applied on a telephony port.
76 Troubleshooting 5.1
the port to ensure there are less than 16 devices connected.
Comments? infodev@avaya.com
February 2013