Lowering EAP max MAC
Lower the eap-mac-max value to match the users.
1. Use the eapol multihost eap-mac-max command to set the mac-max
2. Ensure that there are no errors after execution.
Set EAPOL request packet
Change the request packet generation to unicast.
Task flow Set EAPOL request packet
The following task flow assists you to set the EAPOL request packet to unicast.
Figure 39: Set EAPOL request packet
Setting EAPOL request packet globally
Globally change the EAPOL request packet from multicast to unicast.
Troubleshooting 5.1
value.
EAP multihost repeated re-authentication issue
February 2013
95