Figure 27: Programmer action
MCU-AN-300012-E-V13
Serial Asynchronous Flash Programming
Chapter 4 GALEP-Programmer
Use the functions now enabled on the bottom of
the window to select action:
•
Program: write loaded mhx/bin-file to MCU
•
Verify: compare loaded file to Flash
contents
•
Blank: do a blank check
•
Read: read-out Flash content
•
Erase: perform a chip erase
After
selecting
automatically activated. Press 'Start' button to start
operation.
For further information on available settings in
software and jumper settings on starterkits have a
look at 'Options"
MCU type) and 'Device Help'.
- 30 -
a
operation, tab
'MB91F467D Options" (or other
© Fujitsu Microelectronics Europe GmbH
'Action'
is