Add Resin To The Liquid Material Vat - Roland monoFab ARM-10 User Manual

Add Resin to the Liquid Material Vat

1.
Click the [Calculate job volume]
[Calculate job volume]button
[Print]
tab
MEMO
•
The maximum resin volume for use is 300 g.
•
The calculated value is an estimate of the volume of resin to use, so ensure that a sufficient volume of resin is available.
•
The actual time it takes to complete printing is proportional to the height of the job (Z axis direction).
2.
Prepare the resin selected according to
Do not use different types of resin mixed together.
button to calculate the estimated volume of resin to use.
"Select the Resin to Use" (p. 18).
29
Corresponds to [monoFab Player AM Ver.1.40]
Output (Printing)
or later