Table of Contents
Advertisement
MEMO
•
If the preview is displayed in an undesired shape, an object error may have occurred. Try correcting the object using the
Technology Printing"
(p. 5) function on the
Example of normal preview
•
The quality and precision of printing may vary depending on the condition of the resin, the influence of the liquid material vat, and the surrounding
environment. Therefore, the shape displayed in the
Check cross section
[
]
Clicking the
(Cross Section View) button on the toolbar displays a cross section
of the object.
Clicking
[
]
and dragging the box displayed in the cross section area up and down
(in the Z axis direction) lets you change the position of the cross section.
Cross section view can be used regardless of whether preview display is on or off.
[Layout]
tab.
Example of preview where object has problems
"print preview"
is not necessarily the exact shape that will be printed.
32
Shapes that are not
in the actual data are
displayed.
Corresponds to
Output (Printing)
"Healing""Layered Projection
Drag the edge of the box
displayed in the cross section
area up and down (in the Z
axis direction).
[monoFab Player AM Ver.1.40]
or later
Advertisement
Table of Contents
