Roland monoFab ARM-10 User Manual page 24

5.
Loosen the liquid material vat retaining screws one turn.
6.
Push in the liquid material vat.
Pressing the liquid material
vat lowers the shutter lever.
Check that the liquid material vat stopper is down and is touching the outside of the liquid material vat.
Liquid material vat
NOTE
When pushing in the liquid material
vat, take care not to get fingers caught
between the liquid material vat holder
and the liquid material vat.
24
Corresponds to [monoFab Player AM Ver.1.40]
Output (Printing)
or later