Table of Contents
Advertisement
Output (Printing)
Operation Flow
"Create 3D Data and Convert it to STL Format" (p. 16)
"Import Files" (p. 17)
"Select the Resin to Use" (p. 18)
"Lay Out the Objects" (p. 19)
"Attach Supports" (p. 20)
"Prepare the Modeling Machine" (p. 21)
• "Check That the Liquid Material Vat Is Not Dirty"
• "Install the Liquid Material Vat in the Modeling Machine"
• "Check That There Is No Dirt on the Printing Platform"
• "Adjust the Initial Printing Height (Z0)"
• "Add Resin to the Liquid Material Vat"
(p. 21)
(p. 22)
(p. 25)
(p. 26)
(p. 29)
"Preview the Printing Results" (p. 31)
"Send the Print Data" (p. 33)
• "Pre-Print Confirmations"
(p. 33)
• "Print"
(p. 34)
• "Remove the Job"
(p. 35)
"Post-print processing" (p. 41)
• "Wash the Job"
(p. 41)
• "Finish the Job"
(p. 44)
"Perform Maintenance after Use" (p. 45)
• "Wash Printing Platform"
(p. 46)
• "Wash the Liquid Material Vat"
• "Clean the Work Tray"
(p. 51)
"Use Advanced/Useful Functions" (p. 37)
15
(p. 49)
Corresponds to
[monoFab Player AM Ver.1.40]
or later
Advertisement
Table of Contents
