Table of Contents
Advertisement
3.
When the printing platform has stopped moving, tighten the Z0 adjustment screws while gently holding down the printing platform.
Tighten the screws while holding down the printing platform as though gently pressing it against the liquid material vat. Before fully tightening the screws,
temporarily tighten opposite corners first to ensure that the screws are tightened evenly. This determines the initial printing height.
4.
In monoFab Player AM, on the
The printing platform moves to the highest position.
Z0 adjustment screw
(Both sides of printing platform: 4 locations)
[Print]
[
]
tab, click the
button on the screen.
28
Corresponds to
[monoFab Player AM Ver.1.40]
Output (Printing)
or later
Advertisement
Table of Contents
