Adjust The Finish Of The Job - Roland monoFab ARM-10 User Manual

Adjust the Finish of the Job

In most cases it will not be necessary to change these settings in order to print.
[Print] tab
MEMO
The initial values (recommended values) for each setting under
Use"
(p. 18) .
By setting the distance and speed at which the
the job.
[Advanced Print Conditions] button
[Advanced Print Conditions]
"Printing platform"
(p. 10) moves and the time it is irradiated with UV rays, it is possible to adjust the finish of
will vary according to the selected resin type
40
("Select the Resin to
Corresponds to [monoFab Player AM Ver.1.40]
Output (Printing)
or later