Start Cutting (Output To The Machine Directly Form The Application); Start Cutting (Output To The Machine Directly Form The Ap- Plication) - Roland MDX-40A User Manual

4-3 Starting Cutting

Start Cutting (Output to the machine directly form the application)

When the machine receives the cutting data from the computer, the spindle begins to rotate and cutting
starts. The feed rate and the speed of spindle rotation are determined by the cutting data received.
Important !
Before starting the cutting, make sure of the following items. If there is a problem with any of these
items, the machine may operate in an unintended manner, causing the workpiece to be wasted or the
machine to be damaged.
 Whether the output file is correct.
 Whether the origin point is correct.
 Whether the cutting condition matches the workpiece type.
Procedure


Using the Output File List
In addition to sending cutting data directly from the software, you can take cutting data that has been
made into a text file and import the file into VPanel.
 P. 65, "Start Cutting (output via VPanel)"
64
Chapter 4 Getting Ready for and Performing Cutting
Close the front cover.
Use the software to output the
cutting data.