Solving Problems - Ricoh 3800C Operating Instructions Manual

Fax option type
Hide thumbs Also See for 3800C:
Table of Contents

Advertisement

Solving Problems

This table lists some common problems and their solutions.
Problem
Image background appears
dirty when received at the
other end.
Printed or sent image contains
spots.
Received image is too light.
Message appears blank at the
other end.
You want to cancel a Memory
Transmission.
You want to cancel an Imme-
diate Transmission.
Solution
Adjust the scan density.
The optional Document Feed-
er (ADF) or exposure glass is
dirty. Clean them.
Make sure that ink or correc-
tion fluid is dry before placing
the original.
Request the sender to increase
the image density.
When using moist, rough or
processed paper, the printed
image may be partly invisible.
Only use recommended pa-
per.
When D appears on the dis-
play, toner is beginning to run
out. Replace the toner car-
tridge soon.
The original was placed up-
side down. Place it properly.
If the original is being
scanned, press [Cancel] or the
{ { { { Clear/Stop} } } } key.
If the original is being sent or
if it is in stand-by, press
[Change/Stop TX File] or the
{ { { { Clear/Stop} } } } key.
Press the { { { { Clear/Stop} } } } key.
Solving Problems
Refer to
⇒ p.41 "Image Density (Con-
trast)"
⇒ "Cleaning and Adjusting
the Machine" in Maintenance
Guide Copier System Edition
(for use with Copier Expander
Unit Type 7000) or Mainte-
nance Guide (for use with
Copier Expander Unit Type
3800C)
---
⇒"Paper Recommendations"
in Maintenance Guide Copier
System Edition (for use with
Copier Expander Unit Type
7000) or Maintenance Guide
(for use with Copier Expander
Unit Type 3800C)
⇒"Replacing the Toner Car-
tridge" in Maintenance Guide
Copier System Edition (for
use with Copier Expander
Unit Type 7000) or Mainte-
nance Guide (for use with
Copier Expander Unit Type
3800C)
⇒ p.20 "Placing Originals"
⇒ p.32 "Canceling a Memory
Transmission"
⇒ p.32 "Canceling a Memory
Transmission"
⇒ Chapter 2, "Checking and
Canceling Transmission
Files" in the Advanced Fea-
tures manual
⇒ p.38 "Canceling an Imme-
diate Transmission"
4
83

Advertisement

Table of Contents
loading

Table of Contents