Table of Contents
Advertisement
SECTION 7. SOLVING PROBLEMS
CAUTION: Do not attempt any repairs other than those mentioned in this
manual. Removing covers may expose you to dangerous voltages
and other risks. Refer all servicing to qualified personnel.
CHECK THE INDICATORS AND DISPLAY PANEL
Check the indicators on the operation panel to check if there are any problems.
See page 16 for information about the indicators.
Also, if you see " PROBLEM
↓ to see what the problem is.
press
1. DOCUMENT JAMS
If the Clear Original indicator (
There is a document jammed in the feeder. Remove the jammed document
and repeat the transmission procedure.
The document may be longer than the maximum limit (see Recommended
Types of Document, page 18).
1. Pull up the scanner release and open the scanner.
2. Carefully take out the jammed original. Do not leave any pieces inside. Then
close the scanner.
A defective or nonrecommended document type may cause a jam. See pages 18
and 19.
↓
" in the top right hand corner of the screen,
) blinks:
7
113
Advertisement
Table of Contents
