Original Sizes Difficult To Detect - Ricoh 3800C Operating Instructions Manual

Faxing
C C C C
Press the { { { { Start} } } } key to scan the
original again.
If the above display appears again,
repeat steps
Note
❒ If the machine still cannot detect
2
the original size, the following
display is shown:

Original Sizes Difficult to Detect

The machine finds it difficult to detect the size of the following kinds of origi-
nals. If this happens, the receiving machine may not select print paper of the cor-
rect size. ⇒ p.25 "If the Machine Cannot Detect the Size of Your Original"
• Documents placed on the exposure glass of sizes other than those listed in the
table below
• Originals with index tabs, tags, or projecting parts
• Transparent originals, such as OHP transparencies or translucent paper
• Dark originals with many characters or drawings
• Originals which partially contain solid printing
• Originals which have solid printing at their edges
• Slippery originals
• Originals in bound form of more than 10mm (0.3") thick such as books
The following paper sizes are automatically detected in Facsimile mode.
❖ ❖ ❖ ❖ Metric Version
Paper Size
Where Original is placed
Exposure Glass
Optional Document
Feeder (ADF)
26
A C
to .
L
L L
A3L B4L
Ο
Ο
❒ If this happens, carry out the
following steps.
• Press the key to switch the
Scan Size.
• Press the { { { { Start} } } } key again.
L K L L K L
L L K K L L K K
A4K B5K
Ο Ο
Ο Ο
L K L L "× × × × 13"
L L K K L L
1
A5K 8 /
2
L L
L L
Ο × Ο
Ο Ο Ο