Tone - Ricoh 3800C Operating Instructions Manual

Faxing

Tone

This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the { { { { Tone} } } }
2 key, the machine dials the number us-
ing tonal signals.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the { { { { Tone} } } } key.
Note
❒ A tone is shown as a "•" on the dis-
play.
- Using the { { { { Tone} } } } key with On - - -
Hook Dial
Press the { { { { On Hook Dial} } } } key.
A
B
Enter the fax number with the
number keys.
Press the { { { { Tone} } } } key.
C
D Enter the ID number with the
number keys.
46
- - Sending Tonal Signals by ISDN - -
(Optional ISDN Unit Required)
You can still send tonal signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
❒ This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On Hook Dial or Man-
ual Dial.
❒ When G4 is selected, the display
shows UUI after a tone indication
"•".
❒ When G3 is selected on ISDN line,
you can set the indication after a
tone indication "•" in the User Pa-
rameters : BP(tone) or UUI. ⇒
Chapter 8, "Changing the User Pa-
rameters" (Switch11, Bit1) in the
Advanced Features manual