Mixing Scan Settings For A Multiple; When Placing Originals On The Exposure Glass; When Placing Originals In The Optional Document Feeder (Adf) - Ricoh 3800C Operating Instructions Manual

Mixing Scan Settings for a
Multiple Page Original
When sending an original consisting
of several pages, you can select differ-
ent image density, resolution and
original type settings for each page.
Place your original, select the scan
settings for the first page, dial and
press the { { { { Start} } } } key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
are placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
While the machine is beeping, you
have about 60 seconds (10 for Imme-
diate Transmission) to select density,
resolution and original type. The re-
maining time is shown on the display.
A A A A
Check which pages you wish to
scan with different settings.
B B B B
Remove the previous page and
place the next page.
C C C C
Select the image density, resolu-
tion and original type.
Note
❒ Adjust settings for each page
before you press the { { { { Start} } } } key.
When placing originals in the optional
Document Feeder (ADF)
A A A A
Check which pages you wish to
scan with different settings.
B B B B
Select the image density, resolu-
tion and original type before the
next page is scanned.
Scan Settings
2
43