Outline Of Preparation Procedure Before Operating The Ecr - TEC FS-1450 Owner's Manual

6. OUTLINE OF PREPARATION PROCEDURE BE-
FORE OPERATING THE ECR
This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR
operation.
Turn the POWER SWITCH to OFF before connecting the power cord.
1
Remove the cash register from the carton, referring to
Chapter "2. Unpacking". And take out all the parts and
accessories.
2
Remove the tapes and seals for holding parts or protecting
the register surfaces.
3
Plug the power cord of the register into a wall outlet. Make
sure that the outlet voltage matches that of the power
required for the register.
4
Insert the REG key into the Mode Lock.
5
Turn the Mode Lock to the REG position with the power ON.
WARNING!
- 7 -
(1) (2) (3) (7) (4) (5) (6) (8)
MGR
X
REG
-
Z
SET
MGR
X
REG
-
Z
SET
EO1-11097