Paper Roll Replacement And Other Maintenance Operations - TEC FS-1450 Owner's Manual

15. PAPER ROLL REPLACEMENT AND OTHER MAIN-
TENANCE OPERATIONS
Care must be taken not to injure yourself with the paper cutter.
Replacing the Receipt Roll
RF
WARNING!
1
To remove the Receipt Cover, insert the Receipt
Cover Key to the Receipt Cover Lock, and turn it 90
clockwise.
2
Cut the Receipt Paper as shown in the figure.
3
Depress the [RF] key to feed the remaining paper
end.
CAUTION: Never try to pull out the remaining paper
end by hand.
It may cause paper jamming.
4
Load new paper roll as described in Chapter 6.
- 60 -
EO1-11097