Table of Contents
Advertisement
Address No.
4
Status 1 Selection
6
Tax Status
8
Whole Package Quantity (for Split Package Pricing PLUs)
NOTE:
9
PLU Group No. (for purposes of reports)
ADDITIONAL NOTES
If a PLU is linked to an Other Income Department, the PLU is automatically set as Other Income
PLU.
Amount Limits (High Amount, Low Amount) of each open-price PLU will be determined by those of
its link department.
Description of Programming Contents
-- Continued --
•
Enter the Status Codes 2 to 8 whose status must be set to ON side. More
than one code may be entered. Enter 0 When none of the statuses should
be set to ON.
Status
Code
1
-- vacant --
2
Net to S.I. 1?
3
Net to S.I. 2?
4
Food Stamp (or GST) Status?
5
-- vacant --
6
-- vacant --
7
Lock or Unlock
8
Set Menu
NOTES:
•
Net to S.I. 1,2 ... Refer to the section of PRESET RATE SETTING FOR
SELECTIVE ITEMIZERS near the end of this chapter.
Setting Examples:
To set only Status 2 to ON ... Enter 2 [#]
To set Statuses 2,3,8 to ON ... Enter 238 [#]
To set none of statuses to ON ... Enter 0 [#]
•
Enter one-to four-digit Status Codes for applicable Add-on Tax.
0: Non-taxable
1: Tax 1 (Tax 1 taxable)
2: Tax 2 (Tax 2 taxable)
3: Tax 3 (Tax 3 taxable)
4: Tax 4 (Tax 4 taxable)
[#]
Enter the whole package quantity in max. 2 digits (1 to 99), or enter 0 to
cancel the Split Package Pricing status.
•
When the option "Preset Point for one decimal digit" is selected, this
setting is not allowed to any PLUs.
•
Enter a 2-digit code (1 to 99) as a PLU Group No. to which the PLU
belongs, and depress [#]. To cancel the Group No. once set, enter 0 and
depress [#].
Item
OFF
Unlock (in use) Lock (not in use)
[#]
(More than one code can be
entered for combining Tax1 to
Tax4 taxable status. For
example, enter 12 to select
Tax1 and Tax2 taxable status.)
– 41 –
Selective Status
ON
No
Yes
No
Yes
No
Yes
No
Yes
EO1-11097
Hide quick links:
Advertisement
Chapters
Table of Contents
