TEC FS-2600-1 SERIES Owner's Manual page 182

2. READ AND RESET REPORTS
The key operation for each In-line Report is the same as the corresponding terminal report available on the
standalone ECR. However, the key operation can be executed only on the Master Terminal while the [RTR] key
is turned on.
Conditions required on terminals for In-line Report takings:
Read/Reset Reports (Daily or GT)
Master Terminal:
Satellite Terminals: Signed-OFF condition (Code Entry Method)
Lock Positions Required:
Master Terminal:
Satellite Terminals: Any positions
When opening the cash drawer, be careful not to let the drawer hit any person.
Any time outside a sale
Mode Lock: X/RTR Declaration: ON
Mode Lock: Z/RTR Declaration: ON
OPERATION FLOW OF IN-LINE READ OR RESET REPORTS
To be operated on the
Master Terminal only
Designating
All Terminals
Report Taking Operation for Each Report (see the following pages).
Each Terminal s Report Data Collection Process
When the option Individual Terminal
Data Report Issue is selected.
(applicable to Financial Reports only).
Each Terminal s
Data Print (from
Master Terminal)
Incomplete Ending:
Normal Ending
Consolidated
Data Report
End
WARNING!
Designating Some Terminals
[#]
|Store/Register No.|
Repeat for
of the terminal to be
all the
designated (max. 6 digits)
terminals to
be designated.
[#]
[AT/TL]
In other cases
Also refer to Retry,
Suspending, and
Cancel operations.
Uncollected
Terminals
Store/Register
No. Print
2-2
2.2 In-line Reports
Refer to
Chapter 1
Refer to the
following pages.
Refer to
Chapter 11.
EO1-11138