TEC FS-2600-1 SERIES Owner's Manual page 113

5. PROGRAMMING OPERATIONS
Address No.
3 Status 1 Selection
•
NOTE:
Setting Examples:
To set only Status 2 to ON ................ Enter 2 [#]
To set Statuses 1, 2 to ON ................ Enter 12 [#]
To set none of statuses to ON .......... Enter 0 [#]
4 Status 2 Selection
•
5 Tax Status
•
Description of Programming Contents
Enter the Status Codes 1 to 3 of which status must be set to ON. More than one
code may be entered. Enter 0 when none of the statuses should be set to ON.
Status Item
Code
1 Receipt Type
2
Ordinary or Other Income Dept.
3
Positive or Negative Dept.
The selection of Status Code 1 (Receipt Print Type) is effective only when the
program option "Receipt Single/Double Print" has been selected.
Enter Status Codes 5 to 8 of which status must be set to ON. More than one
code may be entered. Enter 0 when none of the statuses should be set to ON.
Status Item
Code
5 Output to RKP-1?
6 Output to RKP-2?
7 Output to RKP-3?
8 Output to RKP-4?
Enter one-to four-digit Status Codes for applicable Tax.
| | | | | [#]
Tax Status
0: Non-taxable
1: Tax 1
2: Tax 2
3: Tax 3
4: Tax 4
(More than one code can be entered for combining 1 to 4 taxable status. For
example, enter 12 to select Tax 1 and Tax 2 taxable status.)
-- Continued on next page --
-- Continued --
Selective Status
OFF
Single
Ordinary
Positive
Selective Status
OFF
No
No
No
No
5-14
5.4 How to Access a Program Item
ON
Double
Other Income
Negative
ON
Yes
Yes
Yes
Yes
EO1-11138