Store/Register No. Setting - TEC FS-2600-1 SERIES Owner's Manual

5. PROGRAMMING OPERATIONS
ex.) To set the rate on the preceding page for the [CUR 1] key.
Mode Lock: SET
1 [ . ] 4 [CUR 1]
Enter 0 to reset an exchange rate once set. You cannot use a foreign currency key of which the rate is 0.

Store/Register No. Setting

A maximum of 6 digits may be set as ID No. for the store and/or register. And once set, it will be printed on
every receipt and every transaction on journal.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
|Store/Register No.|
Max. 6 digits; 0 to 999999
ex.) To set the following:
Register No. of this terminal: 3001
OPERATION: Mode Lock: SET
3001 [#]
NOTE: The preceding zeros, if entered, will not be printed. For example, if "001234" is entered in the above
operation, "#1234" will always be printed as the Register No.
P00 CUR
CUR1
When you complete the following
programming, the screen shown below will
appear. Depress the [ESC] key to go
back to the program menu screen.
* SET * 02-06-1999 12:34
PROGRAMMING
09 SI1%RATE
10 SI2%RATE
11 CUR RATE1
12 CUR RATE2
13 CUR RATE3
14 CUR RATE4
15 CUR RATE5
16 REG NO.
Please input data.
Pg up
[#]
P00 REG
5-62
5.4 How to Access a Program Item
Journal Print
RATE1
1.4 *
0160 11:35TM
MISC
#0
0.00
Pg dw Enter
Journal Print
No.
#3001
0161 11:42TM
EO1-11138
0%
0%
0 *
0 *
0 *
0 *
0 *