Plu Code Shift Entry; Plu Price Shift Entry - TEC FS-2600-1 SERIES Owner's Manual

9. TRANSACTION ENTRIES
9.15

PLU Code Shift Entry

Depressing the [CODE SHIFT] key designates and enters a PLU item, adding the printed number (1 to 4) to an
entered PLU code.
OPERATION
[CODE SHIFT 1]
[CODE SHIFT 2]
[CODE SHIFT 3]
[CODE SHIFT 4]
Example) When the PLU code 7 is designated after the [CODE SHIFT 2] is depressed, this sales transaction
will result in the sales item entry of the PLU code 9.
NOTES: 1. Depressing the [C] key immediately
after the [CODE SHIFT] key results in
the cancellation of the PLU Code Shift
Entry.
2. You can depress the [CODE SHIFT]
key any number of times before the PLU
Entry. The last depressed [CODE
SHIFT] key becomes effective.
3. Function of the [CODE SHIFT] key is
effective for the next PLU Entry only.
9.16

PLU Price Shift Entry

Up to five different unit prices can be programmed for each PLU and you can select either of the following two
features.
9.16.1 Price Shift Entry "Effective only for One PLU Entry" Feature
OPERATION
(PLU entries)
with the 1st price
9.16.2 Price Shift Entry "Keeping the shifted Price Level" Feature
You can shift the PLU price level to another in the following three cases.
• Using the [PRICE] key
The same key operation as "Effective only for One PLU Entry" Feature. However, the shifted price level is held
until another [PRICE] key is depressed.
• Using the Hourly Range Designation
Hourly range to start shifting each price level can be programmed. If programmed, the price level will be
automatically shifted to another when the hourly range starts.
• Using the Price Level for each Customer
Price level can be programmed to each customer. PLU entry will be performed on the basis of the
programmed information. For details, refer to the section 9.31 Charge Posting by Check Track on page 9-20.
PLU Entry ............................ (To enter a PLU item of the entered code plus 1)
PLU Entry ............................ (To enter a PLU item of the entered code plus 2)
PLU Entry ............................ (To enter a PLU item of the entered code plus 3)
PLU Entry ............................ (To enter a PLU item of the entered code plus 4)
[PRICE 2]
to
[PRICE 5]
Price shift declaration
* REG * 02-06-1999 03:04
CODE
DISP1 DISP2
PLU entry ....................... After the PLU Entry, the price
with shifted price
9-10
9.15 PLU Code Shift Entry
1 1CLKendi
P1S1
SHIFT2
0.00
TOTAL 0.00
DISP3 DISP4 DISP5
mode automatically returns to
the 1st price mode.
EO1-11138