Plu Preset-Code Key/Display Key Setting (Submode 27) - TEC FS-2600-1 SERIES Owner's Manual

5. PROGRAMMING OPERATIONS

PLU Preset-code Key/Display Key Setting (Submode 27)

This programming is used to assign a PLU code to each PLU Preset-code key (SFKC 96), and also used to
assign a display menu table No. to each display key (SFKC 210). You can assign a maximum of 5 different
PLU codes or 5 different display menu table Nos. to one key of the keyboard.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
27 [X] |Keyboard No.| [ST]
1: ECR Keyboard 1
2: ECR Keyboard 2
3: ECR Keyboard 3
4: ECR Keyboard 4
5: ECR Keyboard 5
ex.) To assign the PLU code 9 to the required key on the ECR Keyboard 2 and the display menu table No. 2
to the required key on the ECR Keyboard 5.
Mode Lock: SET
Enter 27, depress [X].
2 [ST] 9 [required key of SFKC 96] 5 [ST] 2 [required key of SFKC 210] [AT/TL]
Location Code (left); refer to REMARK on the next page.
PLU Code assigned to a key (right)
NOTES: 1. When an entry of PLU code or display menu table No. is skipped and a [KEY] is simply
depressed in the above key operation, the preprogrammed PLU code or display menu table No.
of the KEY will be displayed.
2. If "0" is entered as PLU Code or display menu table No. in the above sequence, the KEY will be
closed. Pressing the closed KEY in sale entry will be ignored.
3. The five phases of the keyboard can be shifted by the [MENU] keys in actual sales transaction.
When you enter 27 and depress the [X] key,
|PLU Code or Display Menu Table No.|
Max. 6 digits for PLU Code
1 to 99 for Display Menu Table No.
(Enter 0 to close a key)
Repeat for other Keys.
P27
Keyboard Phase No.
2
PLU
#103
5
DISPLAY
#075
5-36
5.4 How to Access a Program Item
the screen shown below will appear.
* SET * 02-06-1999 12:34
PROGRAMMING PLU KEY
01
02
03
04
05
Please input item No.
Pg up Pg dw Enter
[KEY]
Depress
the
required
key on
the ECR
Keyboard.
Journal Print
PLU KEY
000009
02
0046
EO1-11138
S1
0.00
[AT/TL]
16:21TM