Dll (Down-Line-Loading) Operations; Dll Job List - TEC FS-2600-1 SERIES Owner's Manual

4. DLL (Down-Line-Loading) OPERATIONS

4. DLL (Down-Line-Loading) OPERATIONS
In an in-line system (Master-Satellite system), most programming data are set on the Master Terminal and down-
line-loaded (DLL) to the Satellite Terminals. The DLL operations introduced in this chapter are pure DLLs, i.e.
merely loading the data programmed in the Master Terminal to Satellite Terminals. DLLs automatically performed
with programmed data changes are introduced in the next chapter. If any other DLLs not introduced in this and
next chapters are required, ask your TOSHIBA TEC representative. Please also note that Terminal Designation
(see Chapter 1) can be operated prior to a specific DLL operation, to designate Satellite Terminals that receive
the DLL.
Never try to perform a DLL operation other than those in the following list. If you perform it and
mistakenly change important data, a malfunction may occur on your completed system.
4.1

DLL Job List

Submode
No.
501 Store Name/Message, Commercial Message, Footer Logo Message
Programming
502 Cashier Programming
503 Department Table Programming
504 PLU Table Programming
505 Time/Date Setting
507 Hourly Range Setting
508 Amount Limit Setting for Function Keys and Guests
512 Non-taxable Limit Amount and Gratuity Rate Setting
513 Minor Group Name Programming
514 Major Group Name Programming
519 Combination Report Table Programming
526 Tare Table and Scale Unit Weight Programming
527 PLU Preset-code Key and Display Key Setting
529 PLU Group Name Programming
530 RKP Message Programming
531 Display Message Programming
535 Amount Limit Setting for the [DISC] Key
542 Set Menu Table Programming
543 Combo Sale Table Programming
545 Guest Check Commercial Message Programming
546 Day Part Setting
552 Tender Up Table Setting
553 Display Menu Table Setting
569 Terminal Connection Table Setting
500 %+ and %- Preset Rate Setting
Selective Itemizer Rate Setting
Foreign Currency Exchange Rate Setting
WARNING!
DLL Job
4-1
EO1-11138
4.1 DLL Job List
Remarks
NOTE on the
next page