Install The Accessory Mounting Plate - Bosch ICP-MAP5000-2 Installation Manual

22 en | Installation
Figure 2.8 Install the TAE Box
2.7

Install the Accessory Mounting Plate

1.
2.
2014.12 | 13 | F.01U.168.332
TAE
Align the earth ground stud on the accessory mounting plate with the earth ground hole
on the top mounting rail in the upper right side of the enclosure wall as shown in the
figure below.
Slide the clips on the back of the accessory mounting plate onto the top and bottom
mounting rails.
ICP-MAP0110
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH