MAP5000
3.2
Connect the Control Center
The data bus (BDB) supports up to 32 control centers. The power supply of remote control
centers can be ensured with the expansion enclosure (power supply application).
VdS programming instruction:
Only one area, where applicable with overlapping dependent partition areas, must be assigned
to one control center.
Exception:
Mutually independent areas may also be assigned to the control center of the control panel
area.
Figure 3.4 Data Bus Connection of the Control Center on the External BDB
3.3
Connect the Main Panel
Figure 3.5 Connection Strip of ICP-MAP5000 Main Panel
Connection
1
Bosch Sicherheitssysteme GmbH
Description
External Bosch Data Bus (BDB) connector
Installation Manual
Cable Connections | en
41
2014.12 | 13 | F.01U.168.332