Bosch ICP-MAP5000-2 Installation Manual page 20

20 en | Installation
Figure 2.6 IPP-MAP0005 Power Supply Ratings Label
1.
2.
3.
2014.12 | 13 | F.01U.168.332
Mount the AC terminal block to the enclosure back wall into the corresponding mounting
holes as shown in the figure below and secure it with the supplied screws (1).
Plug the terminal block connected to the AC terminal block into the power supply as
shown in the figure below (2).
Connect the ground wire to the ground connection point of the enclosure back wall as
shown in the figure below (3).
MAT/N F01U064520
ENVIRONMENTAL CLASS 2
OUTPUT A+B (28V), 3A MAX (A+B)
AUX OUTPUT (24V), 1A MAX
IK04
REF: F01U076193
THIS EQUIPMENT
MUST BE CONNECTED
TO A GROUNDED
OUTLET
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH