Install The Control Center - Bosch ICP-MAP5000-2 Installation Manual

Hide thumbs Also See for ICP-MAP5000-2:
Table of Contents

Advertisement

52
en | Cable Connections
Figure 3.17 Connect the Grounding Cable to the Enclosure Door
3.9

Install the Control Center

Mount the IUI-MAP0001 Control Center touchscreen to the wall so that the user interface is at
a comfortable level for the end user. Typical installations of the touchscreen are at shoulder
level, which is approximately 150 to 160 cm (59 to 62 in) above the floor. It must be
guaranteed by corresponding positioning of the control center or by organizational measures
that only the user has an optimum view of the input area.
Figure 3.18 Opening the Control Center
1.
2.
2014.12 | 13 | F.01U.168.332
Unlock the control center base and remove the cover.
Use the control center mounting holes to mark the mounting surface, and use the
supplied hardware to mount the base of the control center to the mounting surface.
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Map5000 seriesIcp-map5000-com

Table of Contents