Panasonic WV-CU980/G Operating Instructions Manual page 40

Maintenance
(continued)
 Keep the joystick in the left end position
The pan state value at the bottom right part of the screen
changes.
 Press
As the cursor moves, the bottom end pan value is
simultaneously displayed at its position and the pan (central)
setting screen is displayed.
 Release the joystick from your hand and let it return
to its central position
The pan state value at the bottom right part of the screen
changes.
 Press
The setting confirmation screen is displayed simultaneously
with the central pan value being displayed at the position of
the cursor.
 Press
The settings registration screen is displayed for a few seconds.
After that, the display changes to the pan/tilt calibration
settings confirmation screen (the set values are reflected).
The joystick tilt adjustment value is displayed in the top right
part of the screen.
When the joystick is moved in the up and down directions, the
tilt adjustment value displayed changes in the range of -64
(joystick moved to the bottom end position) to 0 (hand
released from the joystick letting the joystick return to the
central position) to 64 (joystick moved to the top end position).
The joystick pan adjustment value is displayed in the bottom
right part of the screen.
When the joystick is moved in the left and right directions, the
pan adjustment value displayed changes in the range of -64
(joystick moved to the left end position) to 0 (hand released
from the joystick letting the joystick return to the central
position) to 64 (joystick moved to the right end position).
Note:
• If or
confirmation screen is not displayed, and the
display changes to the pan/tilt calibration settings
confirmation screen (the set values are not
reflected).
 Confirm the pan/tilt calibration settings
When the joystick is moved to the top end position, confirm
that the tilt adjustment value displayed becomes 64.
When the joystick is moved to the bottom end position,
confirm that the tilt adjustment value displayed becomes -64.
When the joystick is moved to the right end position, confirm
that the pan adjustment value displayed becomes 64.
When the joystick is moved to the left end position, confirm
that the pan adjustment value displayed becomes -64.
When the joystick is released from the hand and allowed to
return to its central position, confirm that the tilt adjustment
value and the pan adjustment value displayed both become 0.
When the tilt adjustment value and the pan adjustment value
displayed when the joystick is operated do not become as
described above, since it is likely that the adjustment of the
joystick has not been made correctly. In this case, turn off
the power and carry out the Step 1 to Step 20 again.
 Turn off the power
After making the adjustments, switch off the power supply
and end the calibration.
40
is pressed, the settings