Table of Contents
Advertisement
Major operating controls and their functions
Main Unit - Rear Panel
① Joystick connector [JOYSTICK]
Connect a Joystick.
② Clamp mount
Fix the DC cable of the AC adapter using a cable clamp (provided as an accessory). (☞ Page 14)
③ RJ45 Network terminal [10/100BASE]
Connect to a 10BASE-T or 100BASE-TX network, thereby
connecting the main unit with a PC in which the PC software has been installed.
The access indicator (green) blinks during access.
The link indicator (orange) lights up when a link has been established.
④ Power supply terminal [DC IN]
Connect the DC plug of the supplied AC adapter.
Insert the DC plug fully inside so that it does not become loose or detached.
Joystick unit
Joystick unit
①
Used for panning or tilting a camera.
Can also be used for the cursor
movement in some setting items.
②
[A] Button
Used for carrying out a function
been allocated in advance.
③
[IRIS OPEN / CLOSE] buttons
Used for adjusting the aperture of a
camera.
④
[FOCUS FAR / NEAR] buttons
Used for adjusting the aperture of a
camera.
Link indicator
⑤
⑥
*1
that has
⑦
*1 Start auto mode
*2 End auto mode
*3 Start auto tracking or Auto focus execution
11
(continued)
[B] Button
Used for carrying out a function
been allocated in advance.
Zoom wheel controller
Used for adjusting the zooming of a
camera.
Top button
Used for carrying out a function
been allocated in advance.
Access indicator
*2
that has
*3
that has
Advertisement
Table of Contents
