Main unit settings
The function button items that can be selected and the initial settings of the different function levels (table 1 to table 3) are as
follows.
Names on the
Function
display
01
MENU
02
F1-F10
03
JOYSTICK
04
DEVICE SEL
05
NVR OPERATE
(*) There are no restrictions on the buttons that have not been written here ([ENTER/LOGOUT] [EXIT] [SHIFT] [CLEAR] buttons) as
well as on the logout function (SHIFT] + [ENTER] button). In addition, the restrictions on all buttons during the execution of
menu functions will be treated the same as the setting for the [MENU] button (for example, in the case of the setting 01 MENU
= "Enabled (E)", 04 DEVICE SEL = "Disable (D)", during the execution of the menu function by pressing the [MENU] button
under normal operation, the target switch of 04 DEVICE SEL ([0] button, etc.) is treated as "Enable (E)").
Note: E means Enable, and D means Disable.
(continued)
Target button (*)
[MENU]
(Left side of main unit front panel)
[1-SCREEN] [4-SCREEN] [9-SCREEN] [16-SCREEN]
[AUX 1 / OFF] [AUX 2 / OFF] [WIPER / OFF] [ALM RESET]
[ALM LIVE] [ALM PLAY]
(Joystick unit switches)
[A] [B] [TOP button] [JOYSTICK] [ZOOM Wheel Controller]
[FOCUS FAR] [FOCUS NEAR] [IRIS OPEN] [IRIS CLOSE]
(Right side of main unit front panel)
[MULTI SCRN] [+] [-] [GROUP] [PRESET / PGM] [SEQ / STOP]
[0] to [9] [MON (ESC)] [CAM (SET)]
(Center of main unit front panel)
[GO TO LAST] [STOP] [REC / REC STOP] [REV PLAY] [PLAY]
[FF] [PREV IMAGE] [PAUSE] [NEXT IMAGE] [REV SKIP / PREV
RECORD] [SKIP / NEXT RECORD]
35
Function Level
Level 1
Level 2
Level 3
E
D
D
E
E
E
E
E
E
E
E
E
E
E
D