Table of Contents
Advertisement
Main unit settings
Setting the default gateway
The default gateway is set here.
Operation procedure
1 Select "Gateway" from the menu
The current default gateway is displayed.
Initial value: 192.168.0.1
2 Press
The default gateway setting screen is displayed.
3 Input the default gateway (nnn.nnn.nnn.nnn) using
the numeric buttons
Setting the IP address of the destination of connection
Set the IP address of the destination of connection (the PC in which the PC software to be connected is installed).
Operation procedure
1 Select "Server IP Addr" from the menu
The current IP address setting of the destination of
connection is displayed.
Initial value: 192.168.0.200
2 Press
The destination of connection IP address setting screen is
displayed.
3 Input the address (nnn.nnn.nnn.nnn) using the
numeric buttons
Setting the communication mode with the destination of communication
Set the communication mode (Normal (normal mode) / CU950 Compatible (mode)) with the destination of communication (the
connected PC software). When this setting is made "Normal (normal mode)", in the communication with the connected PC
software, communication that protects from security threats is carried out. When this setting is made "CU950 Compatible
(mode)", communication with the conventional PC software compatible with CU950
In order to carry out communication to protect against security threats, use a PC software version that complies with this
equipment or conventional PC software after updating it to a version that is compatible with this equipment.
*1 CU950 refers to WV-CU950 or DG-CU950.
(continued)
29
4 Press
When the default gateway is input correctly, the settings
confirmation screen is displayed.
5 Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
4 Press
When the IP address of the destination of connection is input
correctly, the settings confirmation screen is displayed.
5 Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
*1
can be made.
Advertisement
Table of Contents
