Panasonic WV-CU980/G Operating Instructions Manual page 10

Major operating controls and their functions
⑲ [ENTER/LOGOUT] button
Used for confirming in the PC software
(same as the operation of pressing the
[Enter] key on the PC keyboard).
Used for logging out of this equipment (if
has been pressed).
⑳
[REV SKIP / PREV RECORD] button
Used for making a reverse skip while
playing back from the recorder.
Used for going to the Prev Record while
playing back from the recorder (when put
in the SEL state (SEL indicator blinking) by
pressing
㉑
[SEL] button, [SEL] indicator
Used for selecting the operation of the
SKIP / NEXT RECORD (REV SKIP / PREV
RECORD) button during recorder
playback.
When this [SEL] button is pressed,
the equipment goes into the SEL state
and the [SEL] indicator blinks, and when
this [SEL] button is pressed again, the SEL
state is released, and the [SEL] indicator
goes off.
㉒
[SKIP / NEXT RECORD] button
Used for making a skip while playing back
from the recorder.
Used for going to the Next Record while
playing back from the recorder when in the
SEL state (SEL indicator blinking) due to
pressing
㉓
[REC / REC STOP] button
Used for starting a video recording by the
recorder.
Used for stopping the video recording by
the recorder (if
㉔
[REW] button
Used for rewinding and playing back when
playing back from the recorder.
㉕ [PLAY] button
Used for starting the video playback by
the recorder.
㉖
[FF] button
Used for fast forwarding and playing back
when playing back from the recorder.
㉗ [GO TO LAST] button
Used for displaying the latest playback
image of the recorder.
㉘ [PREV IMAGE] button
Used for rewinding and playing back when
playing back from the recorder.
This changes the screen or increases or
decreases the set value (when making the
settings on the main unit).
*1
).
*1
).
*2
has been pressed).
(continued)
㉙ [PAUSE] button
Used for pausing the video playback by
the recorder.
㉚ [NEXT IMAGE] button
Used for playing back the next image
when the playing back from the recorder
has been paused.
This changes the screen or increases or
decreases the set value (when making the
settings on the main unit).
㉛
[STOP] button
Used for stopping the video playback by
the recorder.
㉜ [MULTI SCRN] button
Used for simultaneously displaying in a
single monitor multiple camera images by
dividing the screen.
㉝
[－] button /[＋] button
Used for selecting the image by increasing
or decreasing the camera number.
Increases or decreases the numerical
value in some of the settings (while setting
the main unit).
㉞
[GROUP] button
Used for inputting the group number.
㉟
[PRESET / PGM] button
Used for calling a preset position or the
home position of a camera.
Used for programming a preset position of
a camera (if
㊱
[SEQ / STOP] button
Used for starting a sequence operation by
inputting a sequence number.
Used for stopping the sequence operation
(if
㊲ [0] to [9] buttons (numeric buttons)
Used for inputting the camera number, the
group number, the sequence number, etc.
㊳ [MON (ESC)] button
Used while making a setting for returning
without confirming the setting that has just
been made.
Used for canceling in the PC software
(same as the operation of pressing the
[ESC] key on the PC keyboard).
㊴ [CAM (SET)] button
Used for selecting a camera.
While making a setting, used for
confirming or selecting a setting item.
*1 For details of the function, refer to instruction manual
of WV-ASM300.
*2 This function does not support the recorders of the
NV series and the NX series. (As of November 2019)
10
has been pressed).
has been pressed).