Table of Contents
Advertisement
Main unit settings
Button operation sound setting
This is the setting of whether or not the button operation sound is produced, and whether or not an error sound is produced
when an error message such as "Invalid" or "Prohibited" is displayed.
1 Select "Buzzer Operation" from the menu
The current button operation sound setting is displayed.
Initial value: On
2 Press
The button operation sound setting screen is displayed.
3 With
or
change the button operation
sound On/Off
Joystick settings
When panning and tilting the camera set in the PC software by operating the joystick, the setting of whether to make the
direction of operation and the direction of movement of the camera image (up/down, left/right) the same or opposite to each
other is made as follows.
Selection of the item to be set
Operation procedure
1 From the settings menu, select "002 Joystick Setup"
(☞ Page 22 Steps 1 to 2)
2 Press
The joystick up/down operation reversal setting screen is
displayed.
(continued)
25
4 Press
The settings confirmation screen is displayed.
5 Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
3 Press
or
and select the item to be
changed
Each time
or
is pressed, the joystick up/down
operation reversal setting, or the joystick left/right operation
reversal setting is selected.
4 Press
The execution screen of the menu function is displayed.
Advertisement
Table of Contents
