Table of Contents
Advertisement
Figure 75. Replacing the memory air baffles
9. Replace the fans.
For instructions, see "Replacing a fan in the 8335-GTW or 8335-GTX system" on page 86.
10. Using your label, plug the disk drive fan signal cable into the disk drive and fan card.
For instructions, see "Replacing the disk and fan signal cable in the 8335-GTC, 8335-GTG, 8335-
GTH, 8335-GTW, or 8335-GTX system" on page 83.
11. Using your label, plug the power cable into the disk drive and fan card.
For instructions, see "Replacing the fan power cable in the 8335-GTC, 8335-GTG, 8335-GTH, 8335-
GTW, or 8335-GTX system" on page 90.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX system for operation after you remove and replace internal parts" on page 202.
Removing and replacing the disk and fan signal cable in the 8335-GTC,
8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX
Learn how to remove and replace a disk and fan signal cable in the IBM Power System AC922 (8335-GTC,
8335-GTG, and 8335-GTH) or IBM Power System AC922 (8335-GTW and 8335-GTX) system.
80 Power Systems: Servicing the 8335-GTW
Advertisement
Table of Contents
